Descripción
La Luxtreme SL50 Spotlight de Nebo ofrece una distancia de iluminación extraordinaria, a través de un haz de luz.
En modo alto, la Luxtreme SL50 iluminan hasta 800 metros o media milla de distancia. Es recargable, tiene una certificación impermeable IP67.
Modos de Luz
• Alto (450 lúmenes) - 8 horas / 800 metros.
• Medio (250 lúmenes) - 18 horas 50 minutos / 565 metros.
• Bajo (( 50 lúmenes) - 40 horas / 246 metros.
Diseño
• USB recargable.
• Luz a media milla de distancia.
• Control de potencia inteligente (SPC).
• Cuerpo de aluminio de grado de avión anodizado.
• Negro satinado con mangas de aluminio gris fría.
• Dust/impermeable IP67.
• Calificación de resistencia de impacto de 1 metro
Operación
• Botón de activación frontal y dial de selección de modo respaldo.
Accesorios
• Cable de carga USB incluido.
• Manual del usuario.
• Box de regalo.
• Batería recargable.
• Lanyard.
Baterías
• Impulsado por Li-ion 2x21700 9000MAH 3.7V.
Especificaciones
• Peso: 860g (incl. Batería).
• 7.11㎝ x 6.09㎝ x 17.04㎝ (l/w/h).

PRODUCT MANUAL
LUXTREME SL50

Our Luxtreme SL line of spotlights offer extraordinary beam distance and close range flood pattern in an ergonomic and rugged design.
LIGHT MODES
MODES | LUMENS | HOURS | METERS |
HIGH | 450 | 8 | 800 |
MEDIUM | 250 | 19 | 565 |
LOW | 50 | 40 | 246 |
FIRST USE
Remove battery spacer before operation! This unit uses a battery spacer during shipping. Remove before operation.


OPERATION
Rotate the Mode Select Dial to cycle through light modes: Off > Red COB > White COB > Spot
Press the trigger button to turn the unit ON. Press again to turn OFF.
POWER INDICATOR
This product uses 4 LED lights just above the Mode Select Dial.-
- 100% battery: 3 green, 1 red
- 75% battery: 2 green, 1 red
- 50% battery: 1 green, 1 red
- 25% battery: 1 red

CHARGING
Use the included charging cable to recharge the Luxtreme SL. The last indicator light will flash when the unit is charging. When charging is complete, all indicators will light continuously.
BELT CLIP
The Belt Clip is designed so that it can be mounted on either side of the base. Simply screw the Belt Clip in the desired position.